# How to calculate a discount percentage and sale price

> Calculate a discount from two prices, find the sale price, and check successive discounts with clear steps.


**To calculate a discount percentage, divide the amount saved by the original price and multiply by 100.** Use the sale price to find the savings: subtract it from the original price, then divide the difference by the original.

## Calculate the percentage from two prices

Suppose an item cost **CLP 48,000** and now costs **CLP 40,800**. The savings are **CLP 48,000 − CLP 40,800 = CLP 7,200**. Then **CLP 7,200 ÷ CLP 48,000 × 100 = 15%**. Based on those two prices, the discount is 15%.

> Discount percentage = (original price − sale price) ÷ original price × 100
> (CLP 48,000 − CLP 40,800) ÷ CLP 48,000 × 100 = 15%

The original price is the denominator because it is the 100% reference. Dividing by the sale price would answer a different question.

## Find the sale price from a discount rate

When you know the rate, multiply the original price by the percentage as a decimal to find the savings. For CLP 48,000 at 15%, the savings are **CLP 48,000 × 0.15 = CLP 7,200**. Subtract that amount: **CLP 48,000 − CLP 7,200 = CLP 40,800**. You can also calculate the remaining 85% directly: **CLP 48,000 × 0.85 = CLP 40,800**. The University of Hawaiʻi’s [consumer mathematics material](https://math.hawaii.edu/~hile/math100/consa.htm) explains these percentage operations and reverse calculations.

To recover the original price from the sale price and rate, divide the sale price by the remaining proportion. **CLP 40,800 ÷ 0.85 = CLP 48,000**. This assumes 40,800 is exactly 85% of the original price and no other charges or discounts were applied. At a 100% discount, the remaining proportion is zero: you cannot recover the original price by dividing the sale price by it.

## Use the calculation in a spreadsheet

If A2 contains the original price and B2 the sale price, enter `=(A2-B2)/A2` in C2 and format the cell as a percentage. With 48000 in A2 and 40800 in B2, the stored result is 0.15 and the percentage format displays **15%**. Do not multiply by 100 when using percentage formatting, or the sheet will show 1500%. Keep raw amounts in the cells without currency symbols or separators to avoid locale formatting turning them into text.

## Successive discounts and limits

Two discounts in sequence are applied one after the other. A 20% discount followed by an additional 10% leaves **0.80 × 0.90 = 0.72** of the starting price; the combined discount is **1 − 0.72 = 0.28**, or 28%, not 30%. This calculation describes only the sequence of rates on the remaining balance.

For these commercial price calculations, the original price must be positive. If it is zero, a percentage relative to it is undefined because division by zero is not possible. If the final price is higher than the original, the difference is an increase, not a discount. And comparing listed prices does not by itself verify that the reference price was the usual selling price. Check the basis before presenting a markdown.

The cover is an AI-generated illustration.

## Plan your next post in HeyMark.

Keep the idea, review the draft with your team, and see how it performed in the accounts you connected.

[Start free](https://app.heymark.ai) · [See how it works](https://heymark.ai/en/#product)

## Developer and agent resources

- [HeyMark MCP documentation](https://heymark.ai/en/mcp/)
- [llms.txt](https://heymark.ai/llms.txt)
- [Full site content for language models](https://heymark.ai/llms-full.txt)
- MCP protocol endpoint: `POST https://mcp.heymark.ai`
- OAuth protected-resource metadata: [/.well-known/oauth-protected-resource](https://mcp.heymark.ai/.well-known/oauth-protected-resource)
- MCP server card: [/server-card](https://mcp.heymark.ai/server-card)
