HeyMark
Content

Blog Marketing

How to calculate a discount percentage and sale price

HeyMark3 min read
Folded shirt with two blank tags beside a closed notebook on a counter.

To calculate a discount percentage, divide the amount saved by the original price and multiply by 100. Use the sale price to find the savings: subtract it from the original price, then divide the difference by the original.

Calculate the percentage from two prices

Suppose an item cost CLP 48,000 and now costs CLP 40,800. The savings are CLP 48,000 − CLP 40,800 = CLP 7,200. Then CLP 7,200 ÷ CLP 48,000 × 100 = 15%. Based on those two prices, the discount is 15%.

Discount percentage = (original price − sale price) ÷ original price × 100 (CLP 48,000 − CLP 40,800) ÷ CLP 48,000 × 100 = 15%

The original price is the denominator because it is the 100% reference. Dividing by the sale price would answer a different question.

Find the sale price from a discount rate

When you know the rate, multiply the original price by the percentage as a decimal to find the savings. For CLP 48,000 at 15%, the savings are CLP 48,000 × 0.15 = CLP 7,200. Subtract that amount: CLP 48,000 − CLP 7,200 = CLP 40,800. You can also calculate the remaining 85% directly: CLP 48,000 × 0.85 = CLP 40,800. The University of Hawaiʻi’s consumer mathematics material explains these percentage operations and reverse calculations.

To recover the original price from the sale price and rate, divide the sale price by the remaining proportion. CLP 40,800 ÷ 0.85 = CLP 48,000. This assumes 40,800 is exactly 85% of the original price and no other charges or discounts were applied. At a 100% discount, the remaining proportion is zero: you cannot recover the original price by dividing the sale price by it.

Use the calculation in a spreadsheet

If A2 contains the original price and B2 the sale price, enter =(A2-B2)/A2 in C2 and format the cell as a percentage. With 48000 in A2 and 40800 in B2, the stored result is 0.15 and the percentage format displays 15%. Do not multiply by 100 when using percentage formatting, or the sheet will show 1500%. Keep raw amounts in the cells without currency symbols or separators to avoid locale formatting turning them into text.

Successive discounts and limits

Two discounts in sequence are applied one after the other. A 20% discount followed by an additional 10% leaves 0.80 × 0.90 = 0.72 of the starting price; the combined discount is 1 − 0.72 = 0.28, or 28%, not 30%. This calculation describes only the sequence of rates on the remaining balance.

For these commercial price calculations, the original price must be positive. If it is zero, a percentage relative to it is undefined because division by zero is not possible. If the final price is higher than the original, the difference is an increase, not a discount. And comparing listed prices does not by itself verify that the reference price was the usual selling price. Check the basis before presenting a markdown.

The cover is an AI-generated illustration.

Plan your next post in HeyMark.

Keep the idea, review the draft with your team, and see how it performed in the accounts you connected.