HeyMark
Content

Blog

Percentage points vs percent: differences and example

3 min read

Percentage points express the difference between two percentages. Percentage change expresses how much a value changes relative to its starting level. A rate rising from 4% to 5% gains 1 percentage point and increases 25% relative to its initial rate.

Both figures can be correct. Naming them clearly prevents campaign reports from suggesting a much larger or smaller change than the one observed.

Calculate the two differences

For percentage points, subtract the initial rate from the final rate: 5% − 4% = 1 percentage point. You can abbreviate this as 1 pp after explaining the unit.

For relative change, divide the difference by the starting value: (5 − 4) ÷ 4 × 100 = 25%. The denominator represents the rate’s initial level. The Office for National Statistics guide to percentages distinguishes these ways of describing rate changes.

Moving from 5% down to 4% gives −1 percentage point, but a relative change of (4 − 5) ÷ 5 × 100 = −20%. A one-point rise and a one-point fall from different starting levels produce different relative changes because their bases differ.

A booking-page example

Suppose a team compares two seven-day periods. In each, it counts sessions with at least one booking request using the same measurement. These are fictional numbers. A request still needs confirmation to become a booking.

Period Sessions Sessions with a request
Initial 1,000 40
Final 1,200 60

The initial rate is 40 ÷ 1,000 × 100 = 4%. The final rate is 60 ÷ 1,200 × 100 = 5%. The rate changed by 1 pp, equivalent to a 25% relative increase.

The number of sessions with a request rose from 40 to 60: (60 − 40) ÷ 40 × 100 = 50%. That count change differs from the rate change. The second period also had more sessions.

A complete statement would be: “The session request rate rose from 4% to 5%: +1 pp and +25% relative. Sessions with a request increased from 40 to 60.” Keeping both bases visible lets readers check the calculations.

Percentage point calculator

Change the initial and final rates to distinguish the point difference from relative change.

Calculation inputs

Enter each percentage from 0 to 100. For example, enter 4 for 4%, without the symbol.

Initial example result

Point difference
1percentage points
Relative rate change
25%

Points subtract the rate levels; relative change uses the initial rate as its base. The sign indicates direction.

Results are rounded to up to four decimal places; very small values use scientific notation.

With an initial rate of zero, relative change is undefined; the point difference can still be calculated. Use comparable rates and up to six decimal places.

When to use percentage points

Use them to show the gap between rates such as conversion, email open rate, participation or a share of survey responses. To express how much the rate grew relative to its starting level, add the relative change and name the base. An absolute difference in a non-percentage quantity, such as orders or minutes, uses that quantity’s own unit.

Avoid “up 1%” when you mean a rate moved from 4% to 5%. A literal 1% relative increase applied to a 4% rate would produce 4% × 1.01 = 4.04%.

When the starting value is zero

Moving from 0% to 2% adds 2 percentage points. The usual relative-change calculation is undefined because it would divide by zero. Report the starting and final rates and the point difference. Do not label the relative increase 200% or zero.

Before interpreting a change, check that the periods, population, event and measurement are comparable. These formulas describe an observed difference; attributing it to a post or design requires more evidence. For a decision about testing a variant, read how to compare content. To establish the underlying rate first, see conversion rate.

Plan your next post in HeyMark.

Keep the idea, review the draft with your team, and see how it performed in the accounts you connected.